turck TBEN-RFID Series - Page 161

Setting
RFID channels — overview of commands
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 161
Response
Read data, byte 0 HF:
EM4233 SLIC/NXP SLIX2:
n Bit 0: Write protection, page 0
n Bit 1: Write protection, page 1
n Bit 2: Write protection, page 2
n Bit 3: Write protection, page 3
n Bit 4: Write protection, page 4
n Bit 5: Write protection, page 5
n Bit 6: Write protection, page 6
n Bit 7: Write protection, page 7
UHF: not required
Read data, byte 1 HF:
EM4233 SLIC: 0
NXP SLIX2:
n Bit 0: Write protection, page 8
n Bit 1: Write protection, page 9
n Bit 2: Write protection, page 10
n Bit 3: Write protection, page 11
n Bit 4: Write protection, page 12
n Bit 5: Write protection, page 13
n Bit 6: Write protection, page 14
n Bit 7: Write protection, page 15
UHF: not required
Read data, byte 2 HF:
EM4233 SLIC: 0
NXP SLIX2:
n Bit 0: Write protection, page 16
n Bit 1: Write protection, page 17
n Bit 2: Write protection, page 18
n Bit 3: Write protection, page 19
n Bit 4: Reserved
n Bit 5: Reserved
n Bit 6: Reserved
n Bit 7: Reserved
UHF: not required
Read data, byte 3 0
Read data, byte 4 HF:
EM4233 SLIC/NXP SLIX2:
n Bit 0: Read protection, page 0
n Bit 1: Read protection, page 1
n Bit 2: Read protection, page 2
n Bit 3: Read protection, page 3
n Bit 4: Read protection, page 4
n Bit 5: Read protection, page 5
n Bit 6: Read protection, page 6
n Bit 7: Read protection, page 7
UHF: not required