turck TBEN-RFID Series - Page 180

Setting
Setting RFID interfaces via the web server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 180
 Under Output values, select the read command (0x002 Read) from the Command code
drop-down menu.
 Specify the length of the read data in the Length input field (here: 8).
 Specify the read/write head address in the Read/write head address parameter (here: 2).
Fig.90: Reading tags in HF bus mode — process output data