Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show L2 Tpc

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-47
Privileged Mode
show l2tpc
Use the show l2tpc command to display the Layer 2 Tunneling Protocol Connections or the
connection configuration information.
Syntax: # show l2tpc [l2tpc connection-id]
Example: adit 3500# show l2tpc
l2tp#0
l2tp#1
l2tp#2
Example: adit 3500# show l2tpc l2tpc 1
Device = L2TPC#1
State = Disable
Status = Disabled
Schedule Availability = Always
MTU = 1456
Time Between Reconnect Attempts = 0
Restart Timer = 0
PPP
On Demand = Disable
User Name =
Authentication =
Encryption = MPPE-40 MPPE-128 (Stateless)
IP Address =
Mask = 0.0.0.0
DNS Primary = 192.168.2.10 Secondary =
Routing Mode = NAPT
SIP Alg = Enabled
Default Route = Enabled
Rip = Enabled
RIP Listen Msg = none
RIP Send Msg = none
Firewall = Enabled
Additional IP Address
IP Address Mask
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
connection-id Enter the name of a connection.