Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

CHAPTER

Configuration - Voice Port Mode

The Voice Port Configuration commands allow the user to configure the Voice Port parameters.

Enter this sub-group with the (config)# voice-port command from the Configuration mode.

The Voice Port commands are represented by the (config-vport)# prompt.

Note: There are two additional Voice Port groups (FXS-Chapter 23 and Trunk-Chapter 24), please see

their respective chapters for information.

Voice Port Commands

• digit-map (global)

•do

•end

• exit

•history

• no digit-map (global)

•tos

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Digit-Map (Global)