Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Interface Description

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-13
User Mode
show interface description
Use the show interface description command to display interface information.
Syntax: > show interface description
Example: Adit 3500> show interface description
Device State IP/Mask Dependencies
T1 1 running None
T1 2 running None
T1 3 up None
T1 4 up None
Serial 1 up 0.0.0.0/255.255.255.255 T1 1
Ethernet 2 disabled 0.0.0.0/0.0.0.0 None
Ethernet 1 running 192.168.1.1/255.255.255.0 None
IPsec 0 disabled 0.0.0.0/0.0.0.0 Serial 1
IPsec 1 running 192.168.1.1/255.255.255.0 Ethernet 1
Example: Adit MSR> show interface description
Device State IP/Mask Dependencies
LinkCC 1 running None
LinkCC 2 running None
LinkCC 3 down None
LinkCC 4 down None
LinkCC 5 down None
LinkCC 6 down None
LinkCC 7 down None
LinkCC 8 down None
Ethernet 2 up DHCP Unassigned None
Ethernet 1 running 192.168.1.1/255.255.255.0 None
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR