3-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show pptpc
Use the show pptps command to display the PPTP connections or the PPTP connection details.
Syntax: # show pptpc [pptpc connection-id]
Example: adit 3500# show pptpc
PPTP#0
PPTP#1
Example: adit 3500# show pptpc pptpc 1
Device = PPTPC-1
State = Disable
Status = Disabled
Schedule Availability = Always
MTU = 1460
Time Between Reconnect Attempts = 0
Restart Timer = 600
PPP
On Demand = Disable
User Name =
Authentication = CHAP
Encryption = MPPE-40 MPPE-128 (Stateless)
IP Address =
Mask = 0.0.0.0
DNS Primary = Secondary =
Routing Mode = Route
SIP Alg = Enabled
Default Route = Disabled
Firewall = Disabled
Additional IP Address
IP Address Mask
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
connection-id Enter the name of a connection.
To Next Page
Loading...