Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Config Nat-Bypass; Show Config Network-Object; Show Config Port-Trigger

3-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show config nat-bypass
Use the show config nat-bypass command to display the NAT Bypass entries.
Syntax: # show config nat-bypass
Example: adit 3500# show config nat-bypass
nat-bypass ip-address 192.168.1.120 mask 255.255.255.0
nat-bypass ip-address 192.168.1.120 mask 255.255.255.0 enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show config network-object
Use the show config network-object command to display the network object configuration.
Syntax: # show config network-object
Example: adit 3500# show config network-object
network-object id 0 description NetworkObject1 ip-address
192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show config port-trigger
Use the show config port-trigger command to display the port trigger information.
Syntax: # show config port-trigger
Example: adit 3500# show config port-trigger
port-trigger service 134217730 enable
port-trigger service 16777223 enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR