Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Voice-Port Trunk

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-31
User Mode
show voice-port trunk
Use the show voice-port trunk command to display the voice trunk statistics.
Syntax: > show voice-port trunk port
Example: Adit 3500> show voice-port trunk 1
trunk-1 t1-1 does not exist
******************************* CAS 2 *************************************
Channel no Internal Call Id Q931 Connection Id Tdm TimeSlot Call State
-------------------------------------------------------------------------------
1 -1 -1 -1 INACTIVE
2 -1 -1 -1 INACTIVE
3 -1 -1 -1 INACTIVE
4 -1 -1 -1 INACTIVE
5 -1 -1 -1 INACTIVE
6 -1 -1 -1 INACTIVE
7 -1 -1 -1 INACTIVE
8 -1 -1 -1 INACTIVE
9 -1 -1 -1 INACTIVE
10 -1 -1 -1 INACTIVE
11 -1 -1 -1 INACTIVE
12 -1 -1 -1 INACTIVE
13 -1 -1 -1 INACTIVE
14 -1 -1 -1 INACTIVE
15 -1 -1 -1 INACTIVE
16 -1 -1 -1 INACTIVE
17 -1 -1 -1 INACTIVE
18 -1 -1 -1 INACTIVE
19 -1 -1 -1 INACTIVE
20 -1 -1 -1 INACTIVE
21 -1 -1 -1 INACTIVE
22 -1 -1 -1 INACTIVE
23 -1 -1 -1 INACTIVE
24 -1 -1 -1 INACTIVE
trunk-1 t1-3 does not exist
trunk-1 t1-4 does not exist
Field Definition
port Adit 3500: DS1 (T1) interface. Value must be 1.
MSR: Link Cross Connect (LCC). Range = 1-8.