Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Ipsec Authentication-Retries

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-21
Global Configuration Mode
Global Configuration Commands
ipsec
Use the ipsec commands to create an IPSec connection and to configure IPSec global settings. See
Chapter 14, Configuration - IPSec Mode for additional commands in this mode.
ipsec authentication-retries
Use the ipsec authentication-retries command to enable the block-ip feature. To disable block-ip, see
no ipsec authentication-retries command on page 4-40.
Syntax: (config)# ipsec authentication-retries number delay seconds
Example: (config)# ipsec authentication-retries 10 delay 45
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ipsec key generate key
Use the ipsec key generate key command to generate a new public RSA key.
Syntax: (config)# ipsec key generate key
Example: (config)# ipsec key generate key
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
number The maximum number of retries for authentication.
Range is 0-2147483647, with a default of 5.
seconds The time delay after retries. Range is 0-2147483647 seconds, with a
default of 60.