EasyManua.ls Logo

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - No Date Summer-Time; No Dial-Peer Voice Pots Fxs; No Dial-Peer Voice Pots Trunk

Default Icon
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no date summer-time
Use the no date summer-time command to remove daylight savings time setting. To enable
daylight savings, see date summer-time command on page 4-9.
Syntax: (config)# no date summer-time
Example: (config)# no date summer-time
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Not supported by the MSR
no dial-peer voice pots fxs
Use the no dial-peer voice pots fxs command denies access to the Dial Peer Voice POTS FXS
configuration commands. To allow access, see dial-peer voice command on page 4-11.
Syntax: (config)# no dial-peer voice pots fxs port
Example: (config)# no dial-peer voice pots fxs 2 1
Supported Platforms:
Adit 3104, Adit 3500, MSR
no dial-peer voice pots trunk
Use the no dial-peer voice pots trunk command denies access to the Dial Peer Voice POTS trunk
configuration commands. To enable access, see dial-peer voice command on page 4-11.
Note: This command is not supported on the Adit 3104.
Syntax: (config)# no dial-peer voice pots trunk port tag
Example: (config)# no dial-peer voice pots trunk 2 1
Supported Platforms:
Adit 3500, MSR
Field Definition
port Selects the FXS port to configure.
Adit 3104: Range is 1-24.
Adit 3500: Range is 1-4.
MSR: Range is 1-48.
Field Definition
port Select the trunk port.
Adit 3500: Range = 1-4
MSR: Value must be 1.
tag Set destination range. Range is 1-30.

Table of Contents