Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - No Schedule-Availability

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-15
Configuration - IPSec Mode
no reconnect
Use the IPSec no reconnect command to disable automatic reconnection. To enable reconnection, see
reconnect command on page 14-17.
Syntax: (config-ipsec-{n})# no reconnect
Example: (config-ipsec-1)# no reconnect
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no schedule-availability
Use the IPSec no schedule-availability command to set schedule availability to the default value. To
set a schedule rule, see schedule-availability command on page 14-18.
Syntax: (config-ipsec-{n})# no schedule-availability
Example: (config-ipsec-1)# no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no set-pfs
Use the IPSec no set-pfs command to disable Perfect Forward Secrecy. To enable PFS, see set-pfs
command on page 14-19.
Syntax: (config-ipsec-{n})# no set-pfs
Example: (config-ipsec-1)# no set-pfs
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR