Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - 8 Configuration - Dial Peer FXS Mode; Block-Out-Caller-ID; Call-Wait-Caller-ID; Call-Waiting

CHAPTER
8
Configuration - Dial Peer FXS Mode
The Dial Peer FXS Configuration commands allow the user to configure the Dial Peer FXS parameters.
Enter this sub-group with the (config)# dial-peer voice pots fxs port command from the Configuration
mode.
The Dial Peer FXS commands are represented by the (config-dpeer-fxs)# prompt.
Dial Peer FXS Commands
• block-out-caller-id
• call-wait-caller-id
• call-waiting
• calling-party-disc
• codec preference
• destination-pattern
•do
•end
• exit
• fax-protocol
•history
• modem-protocol
• no commands
• sip-authentication