Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Config Interface Multilink

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-27
Privileged Mode
show config interface multilink
Use the show config interface multilink command to display the Multilink port information.
Syntax: # show config interface multilink port
Example: adit 3500# show config interface multilink 1
Interface Multilink 1
ip address unnumbered
description Multilink 1
ip mtu auto
no ip primary-dns
no ip secondary-dns
ip route-mode napt
ip default-route enable
no ip rip
ip rip receive-version none
ip rip send-version none
no sip-alg
firewall enable
metric 0
no shutdown
no ppp authentication
no ppp encryption
no ppp username
ppp restart-timer 3
ppp time-btwn-reconnect 30
no ppp on-demand
ppp link-fragmentation 1600
no ppp qos-interleaving
no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
port Multilink port to display.
Adit 3104, Adit 3200, Adit 3500: Value must be 1.
MSR: Range = 1-8.