Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Shutdown; Sip-Alg

15-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - L2TPC Mode
shutdown
Use the L2TPC shutdown command to disable the interface. To set the interface up
(In-Service), see no shutdown command on page 15-20.
Syntax: (config-l2tpc-{n})# shutdown
Example: (config-l2tpc-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
sip-alg
Use the L2TPC sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg command on
page 15-20.
Syntax: (config-l2tpc-{n})# sip-alg enable
Example: (config-l2tpc-1)# sip-alg enable
Supported Platforms:
Adit 3104, Adit 3500, MSR