Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

2-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

User Mode

show arp

Use the show arp command to display the ARP (Address Resolution Protocol) table.

Syntax: > show arp {all|address|ethernet port}

Example: adit 3500> show arp ethernet 1

1 192.168.1.1 ether Dynam 00:50:da:59:f0:25 eth_lan

Example: adit 3500> show arp 192.168.1.1

ip=192.168.1.1 flags=Dynam mac=00:50:da:59:f0:25 iface=eth_lan

Example: adit 3500> show arp all

# IP-address HW-type Flags HW-address Iface

1 192.168.1.1 ether Dynam 00:50:da:59:f0:25 eth-1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

all Display entire ARP table.

address Display ARP items of the entered IP address.

ethernet port Display Ethernet ARP items only.

port - Define an Ethernet port number. Range 1 - 2.

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Arp