Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - History; Ip Route Metric

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-7
Configuration - IPSec Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax: (config-ipsec {n})# history
Example: (config-ipsec-1)# history
dpd
dpd-timeout 900
history
ip rip r
ip rip receive-version 1or2
ip rip enable
reconnect
ipsec-conn enable
history
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ip route metric
Use the IPSec mode ip route metric command to define a number for the device metric.
Syntax: (config-ipsec {n})# ip route metric metric
Example: (config-ipsec-1)# ip route metric 25
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
metric Enter a number for the device metric. Range is 0-255, with a default of
10.