Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Port-Trigger

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-51
Privileged Mode
show port-trigger
Use the show port-trigger command to display the port trigger information.
Syntax: # show port-trigger
Example: adit 3500# show port-trigger
Service ID:134217730 Enable Service Name:L2TP
Trigger protocol: UDP port: src_start=0 src_end=0 dst_start=1701
dst_end=1701
Service ID:16777223 Enable Service Name:TFTP
Trigger protocol: UDP port: src_start=1024 src_end=65535 dst_start=69
dst_end=69
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR