Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Threshold

6-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - T1 Controller Mode
threshold
Use the Controller T1 threshold command to define the interval and threshold levels for this T1.
Syntax: (config-cont-t1-{n})# threshold {daily|min15}
{bes|css|dm|es|lcv|les|pcv|sefs|ses|uas}
{value}
Example: (config-cont-t1-1)# threshold 15min les 1200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Threshold Settings Minute 15 Daily
BES - Bursty Errored Seconds
Defect Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
CSS - Controller Slip Seconds
Defect Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
DM - Degraded Minutes
Threshold
Default is 0.
Range is 0 - 15
Default is 0.
Range is 0 - 1440
ES - Errored Seconds Defect
Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
LCV - Line Code Violations
Defect Threshold
Default is 0.
Range is 0 - 1389600
Default is 0.
Range is 0 - 133401600
LES - Line Errored Seconds
Defect Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
PCV - Path Code Violation
Defect Threshold
Default is 0.
Range is 0 - 1389600
Default is 0.
Range is 0 - 133401600
SEFS - Severely Errored
Frame Seconds Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
SES - Severely Errored
Seconds Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400
UAS - Unavailable Seconds
Defect Threshold
Default is 0.
Range is 0 - 900
Default is 0.
Range is 0 - 86400