2-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
User Mode
show ip ospf neighbor
Use the show ip ospf neighbor command to display OSPF neighbor information.
Syntax: > show ip ospf neighbor [interface address|neighbor-id|detail]
Example: adit 3500> show ip ospf neighbor
ID Pri State Dead Time Address Interface
10.199.199.137 1 FULL/DR 0:00:31 192.168.80.37 Ethernet1
172.16.48.1 1 FULL/DROTHER 0:00:33 172.16.48.1 Fddi0
172.16.48.200 1 FULL/DROTHER 0:00:33 172.16.48.200 Fddi0
10.199.199.137 5 FULL/DR 0:00:33 172.16.48.189 Fddi0
Example: adit 3500> show ip ospf neighbor 10.199.199.137
Neighbor 10.199.199.137, interface address 192.168.80.37
In the area 0.0.0.0 via interface Ethernet0
Neighbor priority is 1, State is FULL
Options 2
Dead timer due in 0:00:32
Link State retransmission due in 0:00:04
Neighbor 10.199.199.137, interface address 172.16.48.189
In the area 0.0.0.0 via interface Fddi0
Neighbor priority is 5, State is FULL
Options 2
Dead timer due in 0:00:32
Link State retransmission due in 0:00:03
Example: adit 3500> show ip ospf neighbor detail
Neighbor 192.168.5.2, interface address 10.225.200.28
In the area 0 via interface GigabitEthernet1/0/0
Neighbor priority is 1, State is FULL, 6 state changes
DR is 10.225.200.28 BDR is 10.225.200.30
Options is 0x42
LLS Options is 0x1 (LR), last OOB-Resync 00:03:08 ago
Dead timer due in 00:00:36
Neighbor is up for 00:09:46
Index 1/1, retransmission queue length 0, number of retransmission 1
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 1, maximum is 1
Last retransmission scan time is 0 msec, maximum is 0 msec
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
interface address Optional parameter. Enter interface IP address to define display.
neighbor-id Optional parameter. Enter neighbor IP address to define display.
detail Optional parameter. Enable display of detailed information.
To Next Page
Loading...