CHAPTER
16
Configuration - OSPF Mode
The Router OSPF Configuration commands allow the user to configure the OSPF parameters.
OSPF (Open Shortest Path First) is a protocol based on the link-states of routers within a network. OSPF
supports hierarchical routing by segmenting a larger network into smaller more manageable networks
called areas.
Enter this sub-group with the (config)# router ospf command from the Configuration mode.
The Router OSPF commands are represented by the (
config-ospf)# prompt.
Router OSPF Commands
• area authentication
• area stub
• compatible rfc1583
•do
•end
• exit
•history
• network area
• no commands
• router-id
To Next Page
Loading...