Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - No Schedule-Availability; Ppp Username; Shutdown

13-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Serial Interface Mode
no ppp username
Use the Serial Interface no ppp username command remove the PPP username. To set a PPP user,
see ppp username command on page 13-23.
Syntax: (config-int-ser-{n})# no ppp username username
Example: (config-int-ser-1)# no ppp username test-user-name
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no schedule-availability
Use the Serial Interface no schedule-availability command to disable a schedule rule. To add a
rule, see schedule-availability command on page 13-24.
Syntax: (config-int-ser-{n})# no schedule-availability
Example: (config-int-ser-1)# no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no shutdown
Use the Serial Interface no shutdown command to set the serial interface up (In-Service). To set
the interface down (Out-of-Service), see shutdown command on page 13-24.
Syntax: (config-int-ser-{n})# no shutdown
Example: (config-int-ser-1)# no shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no sip-alg
Use the Serial Interface no sip-alg command to disable SIP ALG on this interface. To enable SIP
ALG, see sip-alg command on page 13-24.
Syntax: (config-int-ser-{n})# no sip-alg
Example: (config-int-ser-1)# no sip-alg
Supported Platforms:
Adit 3104, Adit 3500, MSR