Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Config Interface Serial

3-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show config interface serial
Use the show config interface serial command to display serial interface information.
Syntax: # show config interface serial port
Example: adit 3500# show config interface serial 1
interface serial 1
encapsulation ppp
no ppp authentication
no ppp encryption
no ppp username
ppp restart-timer 3
ppp time-btwn-reconnect 30
no ppp on-demand
ip address unnumbered
description Serial 1
ip mtu auto
no ip primary-dns
no ip secondary-dns
ip route-mode napt
ip default-route enable
no ip rip
ip rip receive-version none
ip rip send-version none
no sip-alg
firewall enable
metric 0
no shutdown
no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
port Serial interface to display.
Adit 3104: Value must be 1.
Adit 3500: Range = 1-4.
MSR: Range = 1-8.