Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Config Remote-Admin; Show Config Security-Default; Show Config Security-Log

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-31
Privileged Mode
show config remote-admin
Use the show config remote-admin command to display the remote admin configuration.
Syntax: # show config remote-admin
Example: adit 3500# show config remote-admin
remote-admin telnet primary-port port 23
remote-admin telnet secondary-port port 8023
remote-admin telnet primary-secure-port port 992
remote-admin web primary-port port 80
remote-admin web secondary-port port 8080
remote-admin web primary-secure-port port 443
remote-admin web secondary-secure-port port 8443
no remote-admin snmp
no remote-admin icmp
no remote-admin udp
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show config security-default
Use the show config security-default command to display the security settings.
Syntax: # show config security-default
Example: adit 3500# show config security-default
security-default typical
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
show config security-log
Use the show config security-log command to display the security log.
Syntax: # show config security-log
Example: adit 3500# show config security-log
security-log accept-in-connects enable
security-log rem-admin-attempts enable
security-log prevent-log-overrun enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR