Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Log System Buffer; Log System Notify

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-31
Global Configuration Mode
Global Configuration Commands
log system buffer
Use the log system buffer command to set the buffer size allowed for the system log buffer.
Syntax: (config)# log system buffer kilobytes
Example: (config)# log system buffer 24
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
log system notify
Use the log system notify command to set the remote system notify level.
Syntax: (config)# log system notify {error|info|ip-address address
|none|warn}
Example: (config)# log system notify error
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
kilobytes Set the size of the system log buffer. Range is 1 - 256 KB. Default is
16KB.
Field Definition
error Notify for error level.
info Notify for information level.
ip-address address Enter IP address of remote system to notify.
none No notification.
warn Notify for warning level.