Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Ip Ospf

2-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
User Mode
show ip ospf
Use the show ip ospf command to display the general OSPF routing process information.
Syntax: > show ip ospf
Example: adit 3500> show ip ospf
Routing Process "ospf 0" with ID 192.168.1.1
Process uptime is 28 minutes
Process bound to VRF default
Conforms to RFC2328, and RFC1583Compatibility flag is disabled
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Graceful Restart
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Refreshtimer 10 secs
Number of incoming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of router LSA 0
Router LSA database is unlimited.
Number of network LSA 0
Network LSA database is unlimited.
Number of non-default summary LSA 0
Summary LSA database is unlimited.
Number of asbr summary LSA 0
ASBR Summary LSA database is unlimited.
Number of non-default external LSA 0
External LSA database is unlimited.
Number of LSA originated 0
Number of LSA received 0
Number of areas attached to this router: 0
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR