Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Username; Vlan (Global); Supported Platforms

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-63
Global Configuration Mode
Global Configuration Commands
username
Use the username command to create/modify a user profile for CLI. To delete a username, see no
username command on page 4-51.
Syntax: (config)# username name password password {admin|monitor
|operator}
Example: (config)# username johndoe password mypassword operator
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
vlan (global)
Use the vlan command to allow access to the global VLAN configuration commands. See Chapter 20,
Configuration - VLAN Mode for commands in this mode. To clear VLANs, see the no vlan command
on page 4-52.
Syntax: (config)# vlan
Example: (config)# vlan
(config-vlan)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
name Enter a User name, with a maximum of 15 characters.
password Password for the user, with a maximum of 15 characters. This is an
optional parameter. Default is "password".
admin Read/write privileges, including user access management.
monitor Read only privileges. Default is monitor.
operator Read/write privileges, excluding user access management.