Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-9

Configuration - OSPF Mode

router-id

Use the Router OSPF router-id command to use a fixed router ID. To force OSPF to use the previous

OSPF router ID behavior use the no form of this command, see no router-id command on page 16-8.

Syntax: (config-ospf)# router-id address

Example: (router-ospf)# router-id 10.1.1.1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

address Router ID in IP address format.

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Router-ID