Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Alarms

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-7
User Mode
show alarms
Use the show alarms command to display the active alarms.
Syntax: > show alarms [t1 port|lcc number]
{alert|all|critical|info|major|minor}
Example: Adit 3500> show alarms all
Alarm Severity Time
Alarm LOS T1 4 Major Jan 1 00:00:08 2007
Alarm LOS T1 3 Major Jan 1 00:00:08 2007
Alarm PRI T1 2 - Line NOT Ready Major Jan 1 00:00:08 2007
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
t1 port Display alarms for a specific port.
Adit 3104: Value must be 1.
Adit 3500: Range = 1-4.
lcc number Display alarms for a specific Link Cross-Connect (LCC).
MSR: Range = 1-8.
alert Filter alert alarms (threshold crossing).
all Display all alarms.
critical Filter critical alarms.
info Filter information alarms.
major Filter major alarms.
minor Filter minor alarms.