Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

6-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - T1 Controller Mode

description

Use the Controller T1 description command to set the circuit ID of the T1.

Syntax: (config-cont-t1-{n})# description text

Example: (config-cont-t1-1)# description T1#1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

Field Definition

text Enter a description for the Controller T1.

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Description