Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Ipsec Commands; 14 Configuration - Ipsec Mode; Aggressive-Mode; Authentication

To Next Page

To Previous Page

CHAPTER

Configuration - IPSec Mode

The IPSecConfiguration commands allow the user to configure the VPN IPSec parameters.

Enter this sub-group with the (config)# ipsec vpn_ipsec command from the Configuration mode.

The IPSec commands are represented by the (config-ipsec-n)# prompt.

Note: First a connection must be created. See ipsec net-to-host command on page 4-23, or ipsec net-to-

net command on page 4-24.

For an example of Configuring an IPSec Connection, see Example of IPSec Connection

Configuration command on page 14-21.

IPSec Commands

• aggressive-mode • key

• authentication • lifetime

• description • local-subnet

•do •max-retries

• dpd-delay • mode

• dpd-enable • net-type

• dpd-timeout • netbios remote-brc-addr

• encryption • no commands

• end • reconnect

• exit • rekey

• group • remote-ip

• hash • remote-subnet

• history • schedule-availability

• ip route metric • session-key

• ipsec-conn • set-pfs

• ipsec-manual • transform-set