EasyManua.ls Logo

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Net-Type; Netbios Remote-Brc-Addr

Default Icon
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-11
Configuration - IPSec Mode
net-type
Use the IPSec mode net-type command to define the network type.
Syntax: (config-ipsec {n})# network-type {dmz|lan|wan}
Example: (config-ipsec-1)# net-type lan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
netbios remote-brc-addr
Use the IPSec netbios remote-brc-addr command to set the remote broadcast address for NetBIOS.
Syntax: (config-ipsec-{n})# netbios remote-brc-addr address
Example: (config-ipsec-1)# netbios remote-brc-addr 192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
dmz Demilitarized Zone.
lan Local Area Network.
wan Wide Area Network.
Field Definition
address Enter the remote broadcast address.

Table of Contents