EasyManua.ls Logo

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - History; Host-Ip

Default Icon
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPC Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax: (config-pptpc-{n})# history
Example: (config-pptpc-1)# history
history
ip mtu aut
ip rip enable
ip rip receive-version 1or2
ip route-mode route
metric 3
ppp exec-timeout 1500
ppp restart-timer 600
ppp authentication chap
history
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
host-ip
Use the PPTP Client host-ip command to configure the IP address for the host.
Syntax: (config-pptpc-{n})# host-ip {address}
Example: (config-pptpc-1)# host-ip 192.168.2.101
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
address Enter the IP address for the host.

Table of Contents