Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Log T1 Buffer; Log T1 Notify

4-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
log t1 buffer
Use the log t1 buffer command to set the buffer size allowed for the T1 log buffer.
Syntax: (config)# log t1 buffer kilobytes
Example: (config)# log t1 buffer 24
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
log t1 notify
Use the log t1 notify command to set the remote T1 notify level.
Syntax: (config)# log t1 notify {error|info|ip-address address
|none|warn}
Example: (config)# log t1 notify warn
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
kilobytes Set the size of the T1 log buffer. Range is 1 - 256 KB. Default is
16KB.
Field Definition
error Notify for error level.
info Notify for information level.
ip-address address Enter IP address of remote system to notify.
none No notification.
warn Notify for warning level.