EasyManua.ls Logo

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Lbo; Lbo Short

Default Icon
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-7
Configuration - T1 Controller Mode
lbo
lbo long
Use the Controller T1 lbo long command to set Line Build Out on the T1.
Syntax: (config-cont-t1-{n})# lbo long {-7.5db|-15db|-22.5db}
Example: (config-cont-t1-1)# lbo long -15db
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
lbo short
Use the Controller T1 lbo short command to set Line Build Out on the T1.
Syntax: (config-cont-t1-{n})# lbo short {133|266|399|533|655}
Example: (config-cont-t1-1)# lbo short 266
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
-7.5db CSU attenuation for LBO of 7.5dB
-15db CSU attenuation for LBO of 15dB
-22.5db CSU attenuation for LBO of 22.5dB
Field Definition
133 DSX-1 equalization for 0-133 ft. Default.
266 DSX-1 equalization for 133-266 ft.
399 DSX-1 equalization for 266-399 ft.
533 DSX-1 equalization for 399-533 ft.
655 DSX-1 equalization for 533-655 ft.

Table of Contents