Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Show Interface Serial

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-15
User Mode
show interface serial
Use the show interface serial command to display the configuration of the serial interface.
Syntax: > show interface serial port
Example: Adit 3500> show interface serial 3
Device=Serial 1 State=up IP/Mask=0.0.0.0/255.255.255.255
Dependency=T1 1
Status: Reconnecting...
Tx (Packets/Bytes/Dropped/Errors)=(3332/39984/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(0/0/0/0)
Example: Adit MSR> show interface serial 3
Device=Serial 1 State=up IP/Mask=0.0.0.0/255.255.255.255
Dependency=LCC1
Status: Reconnecting...
Tx (Packets/Bytes/Dropped/Errors)=(3332/39984/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(0/0/0/0)
Supported Platforms: Adit 3104, Adit 3500, MSR
Field Definition
port Serial interface.
Adit 3104: Value must be 1.
Adit 3500: Range = 1-4.
MSR: Range = 1-8.