EasyManua.ls Logo

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Registration; Rtp-Base-Port

Default Icon
496 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-17
Configuration - Voice Service SIP Mode
registration
Use the Voice Service SIP registration command to configure the SIP registration, which allows trunk
registration for each user of a PBX. To disable ignore negotiated registration timeout, see no
registration ignore-negotiated command on page 25-10.
Syntax: (config-voice-serv-sip)# registration {expire seconds|
failed-time seconds|ignore-negotiated enable|rate value|
retry-timeout milliseconds|tries value|window-size value}
Example: (config-voice-serv-sip)# registration expire 5000
Supported Platforms:
Adit 3104, Adit 3500, MSR
rtp-base-port
Use the Voice Service SIP rtp-base-port command to configure the RTP base port. Choice of port to
be advertised during the media-negotiation phase of call setup and used during the call to send and
receive RTP.
Syntax: (config-voice-serv-sip)# rtp-base-port number
Example: (config-voice-serv-sip)# rtp-base-port 2500
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
expire seconds Sets the registration expire timeout. Range is 60 - 86400 seconds, with
a default of 3600.
failed-time seconds Sets the failed registration timer. Range is 30 - 86400 seconds, with a
default of 60.
ignore-negotiated
enable
Enable ignore negotiated expiration timeout.
rate value Sets the number of registrations per minute. Range is 1-300, with a
default of 60.
retry-timeout
milliseconds
Sets the SIP retry timeout (SIP T1). Range is 200 - 5000 milliseconds,
with a default of 500.
tries value Range is 1 - 10 times, with a default of 5.
window-size value Range is 1 - 304 , with a default of 10.
Field Definition
number Range 1026 - 65000, with a default of 28000.

Table of Contents