Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-13
Privileged Mode
help
Use the help command to display the help information for this command. Note: This can also be
accomplished with a ?. This command can be entered in any configuration mode.
Syntax: # help
or
Syntax: # ?
Example: adit 3500# help
? Display all commands
clear Clear command
configure Switch to Configure mode
copy Configures device database
date Display time/date
debug Debug the system
end Exit to User mode
exit Exit to User mode
help Display all commands
history Display past entered commands
log Configure logging settings
no Disable a feature
ping Ping a remote host
reload Reboot the system
show Show various system information
traceroute Traceroute to a remote host
upgrade Upgrade firmware from a local computer
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
To Next Page
Loading...