Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-25

Configuration - Multilink Interface Mode

sip-alg

Use the Multilink Interface sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg

command on page 12-20.

Syntax: (config-int-mlink-{n})# sip-alg enable

Example: (config-int-mlink-1)# sip-alg enable

Supported Platforms:

Adit 3104, Adit 3500, MSR

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Sip-Alg