Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Description

23-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Port FXS Mode
comfort-noise
Use the Voice Port FXS comfort-noise command to enable the comfort noise feature. To disable
comfort noise, see no comfort-noise command on page 23-6.
Syntax: (config-vport-fxs-{n})# comfort-noise enable
Example: (config-vport-fxs-1)# comfort-noise enable
Supported Platforms:
Adit 3104, Adit 3500, MSR
description
Use the Voice Port FXS description command to change the description of the voice port.
Syntax: (config-vport-fxs-{n})# description text
Example: (config-vport-fxs-1)# description VoiceP-#2
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
text Enter a description for the port, with a maximum of 64 characters.