Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 170

4-44 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no local-server
Use the no local-server command to disable a local server. To enable a local server, see local-
server command on page 4-27.
Syntax: (config)# no local-server name
Example: (config)# no local-server BoulderServer
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no log sip
Use the no log sip command to stop SIP logging. To enable SIP logging, see log sip command on
page 4-30.
Syntax: (config)# no log sip
Example: (config)# no log sip
Supported Platforms:
Adit 3104, Adit 3500, MSR
no mail-server authentication
Use the no mail-server authentication command to disable the outgoing mail server
authentication. To enable the mail server, see mail-server command on page 4-33.
Syntax: (config)# no mail-server authentication
Example: (config)# no mail-server authentication
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no nat-bypass
Use the no nat-bypass command to disable the NAT bypass feature. To enable NAT bypass, see
nat-bypass command on page 4-35.
Syntax: (config)# no nat-bypass ip-address address mask mask [enable]
Example: (config)# no nat-bypass ip-address 192.168.1.50 mask
255.255.255.0
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
name Enter a name of the server to remove.
Field Definition
address Enter a NAT bypass IP address.
mask Enter a subnet mask for the above address.
enable Disable NAT bypass.