Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 174

4-48 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no remote-admin web
Use the no remote-admin web command to remove remote administration via
Web-management. To enable remote access via the web, see remote-admin web command on
page 4-56.
Syntax: (config)# no remote-admin web {primary-port|
primary-secure-port|secondary-port|secondary-secure-port}
Example: (config)# no remote-admin web primary-port
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no router ospf
Use the no router ospf command to disable Router OSPF. See Chapter 16, Configuration - OSPF
Mode for commands in this mode. To enter the OSPF configuration mode, see router ospf command
on page 4-56.
CAUTION! A NO ROUTER OSPF COMMAND WILL DELETE ALL OF THE OSPF CONFIGURATION.
Syntax: (config)# no router ospf
Example: (config)# no router ospf
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
primary-port Primary HTTP port, default port 80
primary-secure-
port
Primary HTTPS port, default port 443
secondary-port Secondary HTTP port, default port 8080
secondary-secure-
port
Secondary HTTPS port, default port 8443