Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none

To Next Page

To Previous Page

5-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - LCC Controller Mode

shutdown

Use the Controller LCC shutdown command to set the LCC interface down (out-of-service). To set the

LCC up (in-service), see the no shutdown command on page 5-5.

Syntax: (config-cont-lcc-{n})# shutdown

Example: (config-cont-lcc-1)# shutdown

Supported Platforms:

MSR

Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 198