Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 238

10-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Dial Peer VoIP Mode
destination-pattern
Use the Dial Peer destination-pattern command to define the full telephone number to be used for a
dial peer. To delete a preference, see no destination-pattern command on page 10-5.
Syntax: (config-dpeer-voip)# destination-pattern number
Example: (config-dpeer-voip)# destination-pattern 5551212
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
number Enter the phone number to be used for a dial peer.