Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 447

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-3
Configuration - Voice Port Trunk Mode
description
Use the Voice Port Trunk description command to change the description of the trunk.
Syntax: (config-vport-trk-{n})# description text
Example: (config-vport-trk-1)# description VoiceP-#4
Supported Platforms:
Adit 3500, MSR
digit-map
Use the Voice Port Trunk digit-map command to configure the Digit Map on the trunk level. To disable
digit map, see no digit-map command on page 24-9.
Syntax: (config-vport-trk-{n})# digit-map mode {default|custom}
Example: (config-vport-trk-1)# digit-map mode default
Supported Platforms:
Adit 3500, MSR
Field Definition
text Enter a description for the trunk, with a maximum of 64 characters.
Field Definition
default Pass dialed number as a complete number for routing to the phone
book, or to the proxy if there are no phone book entries.
custom Process as for the default digit map.