Turin Networks Adit 3000 Series and Multi-Service Router (MSR) Card none - Page 49

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-25
User Mode
show nat-fw
Use the show nat-fw command to display the current NAT and firewall connection table.
Syntax: > show nat-fw
Example: Adit 3500> show nat-fw
Number Content
1 TCP 11.0.0.4 36104<--> 172.15.16.1 36104[31.0.0.6 5516 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1320 pkts 7 ppp100 Outgoing BY FTP
2 TCP 11.0.0.4 36103<--> 172.15.16.1 36103[31.0.0.6 21 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1182 pkts 20 FTP child: Yes ppp100 Outgoing
3 TCP 11.0.0.4 36102<--> 172.15.16.1 36102[31.0.0.6 5515 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1320 pkts 7 ppp100 Outgoing BY FTP
4 TCP 11.0.0.4 36101<--> 172.15.16.1 36101[31.0.0.6 21 ]
TIME_WAIT/TIME_WAIT ttl 0 sec bytes 1182 pkts 20 FTP child: Yes ppp100 Outgoing
5 UDP 172.15.16.2 28015<--> 172.15.16.2 28015[*.*.*.* *]
ttl 79 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
6 UDP 172.15.16.2 28014<--> 172.15.16.2 28014[*.*.*.* *]
ttl 79 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
7 UDP 172.15.16.2 28013<--> 172.15.16.2 28013[*.*.*.* *]
ttl 77 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
8 UDP 172.15.16.2 28012<--> 172.15.16.2 28012[*.*.*.* *]
ttl 77 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
9 UDP 172.15.16.2 28011<--> 172.15.16.2 28011[*.*.*.* *]
ttl 75 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
10 UDP 172.15.16.2 28010<--> 172.15.16.2 28010[*.*.*.* *]
ttl 75 sec bytes 0 pkts 0 ppp100 Outgoing CLONABLE UNINIT BY SIP
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR