3-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
show controller t1
Use the show controller t1 command displays the T1 configuration and performance information.
Syntax: # show controller t1 port
Example: adit 3500# show controller t1 1
Settings for interface T1 1
---------------------------
Interface name : T1 1
Transmit status : Up
Receive status : Up
Framing : ESF
Clock source : Clock Reference 1
Line Code : B8ZS
Loop Detection : OFF
FDL Type : NONE
Line Length : DSX-1 equalization for 0-133ft
Status : Connected
Performance Threshold Settings 15 min 1 day
------ -----
unavailable seconds (uas): 0 0
severely errored seconds (ses): 0 0
errored seconds (es): 0 0
severely errored frame seconds (sefs): 0 0
line errored seconds (les): 0 0
controlled slip seconds (css): 0 0
bursty errored seconds (bes): 0 0
degraded minutes (dm): 0 0
line code violations (lcv): 0 0
path code violations (pcv): 0 0
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Field Definition
port DS1 (T1) interface.
Adit 3104 Range = 1
Adit 3500 Range 1 - 4
To Next Page
Loading...