WAGNER TITANUS User Manual

TITANUS MICRO·SENS
®
Contents
MS_A_Inhalt-en-e Data: 01/09
Contents
4 Design 4 – 1
4.1 General 1
4.1.1 Regulations 2
4.1.2 Pipe system 3
4.1.3 Air flow monitoring 7
4.1.4 Sensitivity 9
4.1.5 Design Limits 10
4.2 Project planning 11
4.2.1 Project planning guidelines 11
4.2.1.1 Determining the necessary accessories 11
4.2.2 Pipe accessories 12
4.2.3 Sensitivity and pipeline project planning 13
4.2.3.1 Pipeline project planning with pipe accessories 13
4.2.4 Aperture diameter 17
4.3 Special project planning 19
4.3.1 Project planning for individual aperture monitoring 19
4.3.1.1 I-Pipe system 19
4.3.1.2 U-Pipe system 21
4.3.1.3 M-Pipe system 23
4.3.1.4 Double-U-Pipe system 25
4.3.2 Simplified pipe design 27
4.3.2.1 I-Pipe system 27
4.3.2.2 U-pipe system 28
4.3.2.3 M-pipe system 29
4.3.2.4 Double-U-pipe system 30
4.3.3 Design for Forced Air Flow 31
4.4 Power Supply 35
5 Installation TITANUS MICRO·SENS
®
5 – 1
5.1 General 1
5.2 Installation site 2
5.2.1 Fitting the TITANUS MICRO·SENS
®
air sampling smoke detector2
5.2.2 Connecting the air sampling pipe 5
5.3 Incorporation and electrical connection of additional modules 6
5.4 Connection to CFDU, with reset button 9
5.5 Incorporating the reset board 10
5.5.1 Connection to a CFDU, with reset board 12
5.6 Incorporating the reset and isolating button board 13
5.6.1 Function switching plan, reset and isolating button board 14

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)