WAGNER TITANUS - Noise Suppressor Installation

Technical Description TITANUS MICRO·SENS
®
2 – 22 Data: 01/09 MS_A_02-b-en-e
2.3.6 Noise suppressor
TITANUS
MICRO·SENS
®
noise suppressor
Fig. 2.30: TITANUS
®
with noise suppressor
By using the SD-1 noise suppressor, the noise level can be reduced by
up to 10 db(A) for use in areas in which low noise emissions are required
from the TITANUS
®
(such as in offices or hospitals).
The noise suppressor is mounted directly to the air recirculation on the
TITANUS
®
.