TITANUS MICRO·SENS
®
Installation
MS_A_05-en-e Data: 01/09 5 – 1
5 Installation
TITANUS MICRO·SENS
®
5.1 General
The regulations, guidelines and provisions set out in Chapter 4.1 apply.
The following must be considered when the TITANUS MICRO·SENS
®
aspirating smoke detector is being installed:
1. Interventions, changes and modifications to equipment are to be
avoided. If adjustments are unavoidable, they must be discussed
with the operator, the manufacturer and/or the supplier (written ap-
proval).
2. All interventions to the in-house network (230 V/400 V supply) and to
outside systems must be carried out on the customer side. These in-
clude, for example:
• the power supply primary connection
• any connecting to outside systems (e.g. central units)
• the carrying out of any lightning and surge protection measures
which are required to comply with standards
To Next Page
Loading...
