WAGNER TITANUS User Manual

Commissioning TITANUS MICRO·SENS
®
7 – 10 Data: 01/09 MS_A_07-en-e
7.6 Testing fault forwarding
The following steps can only be taken after air flow adjustment as
described in Chapter 7.3 "Air Flow Sensor Adjustment" has been
carried out.
Test fault forwarding.
Check when testing air flow monitoring whether a fault is displayed on the
TITANUS MICRO·SENS
®
and if applicable the FAS.
ATTENTION

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)